Description

Melt Gloop from Mayco Ritual Glazes is a stoneware glaze designed for application in dots or creating a dripping effect down your ceramic piece using a syringe or squeeze bottle. Effects are achieved by applying the glaze with a syringe or squeeze bottle. Fire to cone 5-10 (1210°C-1280°C). See cone 10 result under Information. 473 ml. Ready mixed. Not foodsafe.

Information

Result at cone 10:

Before application: Stir thoroughly using a stick, palette knife, or the end of your brush, as it will be very thick in the jar. For better adhesion, lightly dampen the bisque surface with a sponge before application.

Basic Application: Apply dots in varying thickness and patterns to greenware or bisque.  For more movement and a dripping effect, apply larger dots on a vertical surface. The glaze can flow over textured areas. Continuously shake your applicator tool during use to eliminate air bubbles that can disrupt the flow of glaze and cause uneven texture or splatter. Allow the glaze to dry. It is recommended to fire your piece as soon as possible to prevent issues with glaze adhesion. Fire to preferred temperature; cone 5-10 (1186°C-1285°C). Sample tile was fired to cone 6 oxidation (1222°C). Testing is recommended. Results may vary.

Storage: Due to the thickness of Melt Gloop, it’s recommended to level out the glaze by gently tapping the product jar onto a table surface after application. This helps alleviate any peaks in the glaze that could lead to drying issues.

Tips

• Effects are achieved by applying glaze with a syringe or squeeze bottle on greenware or soft-fired, cone 04 stoneware bisque (1940°F/1060°C).
• For a more dynamic effect and a dripping appearance, apply larger dots on a vertical surface.
• The glaze can flow over textured areas.
• For better adhesion, dampen the bisque with a sponge before applying.
• Heavy application or over-handling may cause the glaze to pop off. Handle with care.
• Can be layered and marbled with other Melt Gloop colors.
• When using Melt Gloop over a Stoneware Engobe or Underglaze, it is recommended to bisque fire to cone 04 before applying Melt Gloop.
• Glaze remains dimensional over Underglazes and Stoneware Engobes; flattens under or over a glaze.
• It is recommended to fire your piece as soon as possible to prevent issues with glaze adhesion.
• When applied as a horizontal line, the fired glaze effect may separate or break, turning into vertical drips.
• When building layers, it is recommended to apply glaze on the shoulder or rim of the piece to help with adhesion.
• Heavy application may cause the glaze to pop off.

Video

Safety

Document

Flyer